Thursday, February 18, 2016

Better When I'm Dancin' Trio x 2, Front and Back View, Practice, Feb 16th, 2016

Some of the girls are performing for a talent show, and we have only learned the first part of this routine.  Hope this helps!

Better When I'm Dancin' Trio x 2, Front View, Practice, 1st Half Only



Better When I'm Dancin' Trio x 2, Back View, Practice, 1/2 only

2 comments:

  1. The 33-centimeter-long structural fittings that hold the aft kitchen galley to the airframe are 3D printed by an organization called Norsk Titanium. A 2kg titanium part would usually require a 30kg block of titanium to machine it from, producing 28kg of waste, but 3D printing the same part requires solely 6kg of titanium wire. Charles Hull filed the first patent on August 8, 1984, to use a UV-cured Double Sided Tape acrylic resin using a UV masked light supply at UVP Corp to construct a simple mannequin.

    ReplyDelete
  2. This error occurs when the machine finds an unrecognized or bad word or instruction in the NC file. CNC managed machines luggage sets generally include quantity of} axes of motion and the movements can be rotary, linear or both. Cutout machines like lasers often include two axes, X and Y. Milling machines generally include minimal of|no less than} three axes, X, Y and Z. Some milling machines have five axes, three linear axes and two rotary axes that allow the cutter to maneuver in a 180┬║ hemisphere.

    ReplyDelete